2012年3月13日星期二

Dell Inspiron E1505 AC adapter,Dell Inspiron 15 AC Adapter,Dell Inspiron 640m battery

My main computer is a Dell Inspiron E1505 AC adapter it uses the fan and heat sinks to cool the processor. By using these heat sink (copper?), And piping to collect a lot to reduce the cooling capacity of the machine a little dust. If you do not have this particular machine, do not worry. To use some common sense as long as the basic idea is the same.
Steps 1Tools and supplies a first step Dell Inspiron 6400 battery
You need two things: Q technique and a screwdriver you first remove the battery (which may be really good! Step, but thoroughly). Unscrew the cap Ram – in order to easily remove the other cover. You need to remove the plastic cover behind the Dell Inspiron 1320n AC Adapter
button – to delete any necessary screws and retain traces of where they came from (I have some longer than usual)
Fan-step 2 Removing bile duct / month Dell Inspiron 15 AC Adapter
Carefully remove the plastic shell. It should not be very strong – if very tight, go back and look for missing screws. Now, we have to eliminate some small screws to hold these two lovely task of duct fan / month. I use a magnetic prompted a # 1 screwdriver. It saved my tools, because I can easily drop or lose those screws as Dell Latitude D505 AC Adapter.
Step 3 Clean Dell Inspiron 640m battery
Use your Q-corner and wipe away any dust off the fan blades, etc. from the heat sink. I think you could use some compressed air, but I do not have any and can be everything. When you’re done, re-assembly, start the notebook with your Dell Latitude D600 AC Adapter.

没有评论:

发表评论